Handheld Potentiostat/Galvanostat, Electrochemical Analyzer (MedPstat 2.0)

MedPstat 2.0 is a Handheld Affordable & Precision Potentiostat/Galvanostat, with a wide range of ± 4.8 V, 100 mA. Optimum for electrochemistry learning & research applications. Included is a high-quality dummy cell for learning & calibration applications and lifetime access to free software - MedEplot for PC, data acquisition & plotting.

Detailed Specifications:

• Electrochemical Methods: CV, LSV, ChronoAmp, OCP, DPV, SWV, ChronoPot, Charge-Discharge, Corrosion Analysis (Tafel), Corrosion Analysis (Polarization Resistances)
  Channels Per Unit: 1
• Applied potential range: ± 4.8 V
• Applied Potential Accuracy: 0.1% of the setpoint, 1mV Max
• Applied Potential Resolution: 152 µV
• Measured Potential Accuracy: 0.1% of the setpoint, 1mV Max
• Measured Potential Resolution: 156 µV
• Compliance Voltage: ±8 V
• Maximum Current: 100 mA
• Current ranges: 7 Ranges
• Measured Current Accuracy: 0.5% of the range, 50pA max
• Measured Current Resolution: 0.015% of range, 1.5 pA
• Applied Current Resolution (Gal): 1.52 nA
• Measured Potential Range (Gal): ±7.5 V
• Input Impedance: > 10 TΩ
• Input Bias Current: 1pA Max
• Computer Interface: USB
• Channel Cable Length: 0.8 meters
• power supply: 12V DC
• Power Supply Requirements: 100V - 240V AC
• Weight: 305 grams
• Physical Dimensions: 181mm * 91.5mm * 42mm
• Operating temperature range: 0 to 50°C
• Communication: USB
• PC Software: Available with a lifetime license
• Bandwidth: up to 4 MHz
• Max. data acquisition rate: 1 KHz
• ADC/DAC Resolution: 16 bit
• Slew Rate (No Load): 3.5 V/µs
• Maximum ADC Sampling Speed: 5,00,000 samples/sec