by MTX content | Aug 9, 2024 | Application Notes, Electrochemical Analyzer AN
This application note provides comprehensive guidance on using the mini Dummy Cell for MedPstat calibration. The mini Dummy Cell includes a 1K ohm resistor, essential for checking the current ranges during calibration. The primary focus of this document is to check...
by MTX content | Aug 9, 2024 | Electrochemical Analyzer FAQ
First, check the USB-C type cable to ensure it is properly connected. Then, go to the PC settings and open the Control Panel. Navigate to “Ports (COM & LPT)” and check if the USB drive is recognized. If it is not showing up or is listed under...
by MTX content | Aug 9, 2024 | Electrochemical Analyzer FAQ
The dummy test cell provided with MedPstat is primarily used for calibrating instruments and checking the current ranges. So, we provide a 1K resistor, which allows for easy testing of the instruments. If you encounter any issues or have doubts about the readings,...
by MTX content | Aug 9, 2024 | Electrochemical Analyzer FAQ
The MedPstat requires a power supply of 100V – 240V AC, 50/60 Hz. We provide a high-standard power supply compatible with American, Australian, UK, and European/Indian connections for universal use (You can choose any of them). The power cable is 1.5 meters long...
